CMX1812
Take back your overgrown acreage.
CMX1812 Specifications
Published CMX1812 specifications. Confirm the current machine configuration with your dealer.
Engine & transmission
- Engine
- Vanguard twin-cylinder
- Published engine power
- 18 hp
- Transmission
- Variable-speed hydrostatic
- Transmission oil system
- Charge pump, oil filter, 4-litre tank
- Drive selection
- 2WD / true mechanical 4WD
- Gear range
- High / low
- Differential lock
- Selectable positive diff-lock
- Fuel capacity
- 18 litres
Cutting & controls
- Cutting width
- 975 mm
- Cutting height
- 0–150 mm, stepless
- Cutter drive
- Shaft driven
- Published sapling capacity
- Up to 36 mm*
- Transmission controls
- Hand and foot
- Foot pedal
- Heel/toe forward and reverse
- Hour meter
- Included
*Vegetation species and conditions affect cutting performance.
Operator comfort & terrain
- Operator area
- 100 mm longer
- Seat
- Three-position suspension, adjustable position and angle
- Steering
- Telescopic; adjustable reach and angle
- Grab rails
- Extended
- Axles
- Full-cast front and rear
- Maximum speed
- 14.2 km/h
- Minimum turning radius
- 1,900 mm
- Published gradeability
- 25°
Slope suitability depends on surface conditions, traction, obstacles and machine configuration. Follow the operator’s manual.
Vanguard power.
Built for demanding acreage.
Twin-cylinder power, mechanical traction and a shaft-driven deck for the ground you want to reclaim.
Power through denser growth.
An 18 hp Vanguard engine and shaft-driven deck tackle dense undergrowth, canes and saplings up to 36 mm, depending on vegetation and conditions.
Shaft-driven cutting.No cutter-deck belt to replace.
Keep control of the ground.
Selectable 2WD/4WD, positive diff-lock and high/low range help you adapt to the job.
True mechanical 4WD.Mechanical drive delivers power to the front planetary hubs.

More room to settle in.
A 100 mm longer operator area gives you extra legroom. Adjust the steering reach and angle, seat position and seat angle to suit you.
Suspension seat.Three-position suspension seating and extended grab rails are included.
Make it your Razorback.
Choose the accessories you’d like to discuss. Your dealer will confirm compatibility, installation and pricing.
Accessory photos show examples from across the Razorback range. Final fitment may differ.

Foldable ROPS & seat belt
Match the frame to your seat configuration and discuss the right setup for your terrain.
$2,200 RRP inc. GST

Sun canopy
Overhead shade for time on the property. Requires a fitted ROPS.
$775 RRP inc. GST

Grammer suspension seat
Optional suspension seat with armrests. A three-position suspension seat is already standard.
$1,700 RRP inc. GST
Your accessory shortlist 0 selected
Select accessories above to build a list for your dealer.
A canopy requires a fitted ROPS. Accessories are quoted separately.
Your selections are not sent automatically.

